How to Repair Patio Chair Straps?

How to fix a broken patio chair straps is not an easy task. Most of the time, you would have to replace your whole set, but if you can repair one, you can save some money by doing it yourself.

How to Repair Patio Chair Straps?

A lot of people use these chairs around their patios for relaxation and entertainment purposes. However, there are times when you cannot sit on them or when they become damaged.

You might think that a patio chair strap is just made of canvas and fabric. But they are much more than that. There are several parts that make up a complete set of straps. Let us take a look at them.

The first part is the metal hardware. There are different kinds of hardware available in the market. Some of them are made of plastic, while others are made from metal. The main purpose of this hardware is to hold up the strap and also keep it from sliding on the wood.

Then there is the buckle, which is made from metal hardware. These buckles are secured by the metal hardware. Now let us get to the problem.

How to repair patio chair straps can be easily done if you have a set of metal hardware on the bottom of your set. If you do not have this, you can always use wooden braces.

Wooden braces are the perfect solution to a chair strap which has been damaged. All you need to do is to glue them into place. Afterward, you can just use tape to hold them in place.

Another method on how to repair patio chair straps is to use screws and nails. Just use a screwdriver and gently tap the screws in the place where the buckle used to be. When it comes to nails, you can either buy or make your own. If you are going to buy them, make sure that you can put them on one another for easy tightening.

If you are going to make your own wooden brace, just find some wood and cut it in small pieces. Once you are done with it, you can add nuts and washers.

You can also use some epoxy and some paints for how to repair patio chair straps. The trick here is to add it at a little rate so that it does not cause any harm to the metal hardware. If the paint does not stick to the hardware, then you can simply repeat with the other part of the strap. by adding another coat.

Before you do the painting, you should first get rid of all dirt and grease from the chair straps. This will help you to apply a smooth finish to the paint. The best thing is to sand it very well because the sandpaper will prevent the paint from cracking when you apply it.

Then you can start applying it with the spray bottle. When you are done, you can rinse it off with water and then buff the paint with a rag.

Another way on how to repair patio straps is to use a brush. Just use a brush that has been dipped in wax. You must make sure that the paint is completely dry before you apply it on the chair straps.

When you want to know how to repair patio chair straps by sanding and polishing the wood of your chair, you can hire a contractor who can do it for you. Just keep in mind that it would cost you more to do it yourself since you will need to pay for the chemicals and the sandpaper too.